CPE295 is an outdoor 5.8GHz Gigabit monitoring transmission bridge designed for short and medium distance video convergence wireless transmission and broadband operation transmission scenarios such as tower cranes, orchards, aquaculture, factories, schools, communities, offices across streets . The device uses Qualcomm 775MHz main frequency chip ,Working in the 5.8GHz band, 11AC 2T2R technology can provide wireless data transmission rate of up to 867Mbps with 20 high-definition cameras can be taken from 5km point to point. Chip built-in RF power amplifier and 14dBi high-gain directional antenna, outdoor point-to-point bridge distance up to 5 kilometers. Based on the pole design, can be directly installed on the rod or column items, beautiful and generous, Industrial grade advanced waterproof and dustproof plastic shell. 4000v port lightning protection design, can work in a variety of wind, rain, snow and other extreme outdoor environment.
|
Model |
CPE295 |
|
Product shape |
Outdoor pole type or wall hanging |
|
Product size |
177*80*55 |
|
Application scenarios |
Tower crane, orchard, aquaculture, factory, school, community,Office cross-street video convergence wireless transmission and broadband operation transmission |
|
Operating Frequency Range |
5.8GHz |
|
Maximum access rate |
867Mbps |
|
Wireless protocol standard |
IEEE 802.11a/n |
|
Ethernet interface |
1x10/100Mbps LAN Port |
|
TDMA agreement |
The fifth generation TDMA5 agreement |
|
Reset button |
1 |
|
LED light |
1xPOE, 1xLAN, 1x wireless pairing, 3x signal strength indicator light |
|
Antenna gain |
13dBi dual polarized directional antenna |
|
Antenna Angle |
Horizontal Angle 30 degrees ,vertical Angle 30 degrees |
|
DC |
1xDCport |
|
Full load power consumption |
6.5W |
|
Dustproof and waterproof Level |
IP64 |
|
Power supply way |
Standard POE 802.3af/at power supply |
|
9V-48V DC power supply |
|
|
48V passive POE |
|
|
Power supply distance |
PoE power supply distance is 100 meters |
|
11a 6Mbps transmitted power |
25dBm(single port,2x2MIMO transmitted power 28dBm) |
|
11a 54Mbps transmitted power |
23dBm |
|
11n MCS transmitted power |
23dBm |
|
11ac MCS9 transmitted power |
22dBm |
|
11a 6Mbps receiver sensitivity |
-93dBm±1.5dBm |
|
11n MCS7 receiver sensitivity |
-73dBm±1.5dBm |
|
11ac MCS9 receiving sensitivity |
-64dBm±1.5dBm |
|
Working mode |
AP, client, Wireless WAN, P2MP, Relay, Routing |
|
Power on the automatic bridge |
Support (Restore factory Settings only) |
|
channel bandwidth |
10/20/30/40MHz |
|
TDMA private contract |
The fifth generation TDMA5 |
|
Transparent bridge |
Support |
|
SSID Hidden |
Support |
|
SSID quantity |
1 |
|
WEP encryption |
Supports 64/128-bit encryption |
|
WPA-PSK |
AES/TKIP |
|
WPA2-PSK encryption |
AES/TKIP |
|
WPA encryption |
Support |
|
WPA2 encryption |
Support |
|
Wireless access control |
Support Filtering based on MAC addresses |
|
Wireless access control |
Support |
|
AP isolating |
Support |
|
Client side access restriction |
Supports RSSI threshold Settings for wireless clients |
|
Channel offset |
Support |
|
WMM |
Support |
|
DHCP servicer |
Support |
|
SNMP |
V1，V2C |
|
Diagnostic tools |
Supports ping,Trace route, signal scanning, and Ping watchdog |
|
Scheduled restart |
Support |
|
Device management |
Device management |
|
Software upgrade |
Support |
|
Device restart |
Support |
|
Restoring device factory Settings |
Support |
|
Configuration backup |
Support |
|
Configuration restoration |
Support |
|
Log function |
Support |
|
Bridge assistant management |
Support |
|
Default login |
192.168.2.66 |
|
The default user name |
admin |
|
The default password |
admin01 |
|
The default password |
-30℃to 55℃ |
|
Working humidity |
10%-90%RH (non-condensing) |
|
Storage temperature |
-40℃ to70℃ |
|
Storage humidity |
10%-90%RH (non-condensing) |
